Casambi Enabled Network 4-Scene Wall Switch (120-277V)

Casambi Bluetooth Low Energy (BLE) Mesh Networking: Communicates wirelessly with other Casambi-enabled mesh network devices in a self-organizing, encrypted wireless mesh with no single points of failure.

4 Field-Customizable Scene & Control Buttons: Buttons can be programmed for ON/OFF/RAISE/LOWER, preset dimming scenes, color-tuning (CCT cooler/warmer) scenes, dynamic multi-step animations, and partition scenes.

Versatile Default & Programmable Button Actions: Supports default dual-button AUTO/ON (resume automatic profile control), OFF, and press-and-hold DIM Up / DIM Down on Buttons #1 & #2, plus Scene A/B recall and press-and-hold CCT Colder/Warmer adjustment on Buttons #3 & #4—or full custom assignment (individual luminaire, zone/group, area, scene, tunable white, or animation cycle) via the Casambi app.

120–277VAC Universal Line-Voltage Power: Hardwires directly to 120–277VAC 50/60Hz line power (Black: Line, Silver: Neutral, Green: Optional Ground) with a low 1.5W maximum power consumption—eliminating battery replacements and 0-10V control wiring runs.

Standard Decora Wall Box Installation: Installs cleanly into a standard 1-gang wall box and features a standard Decora-style opening for seamless multi-gang installations.

Mobile App Commissioning & Timing Customization: Easily programmed via the Casambi App (available on iOS and Android), allowing installers and end users to configure time delays, fade times, wait durations, toggle modes, and time schedules.

Hardware Factory Reset: Simple front-panel factory reset by holding Button #1 and Button #4 simultaneously for 10 seconds to return the device to its un-provisioned state.

Enterprise-Grade Cybersecurity & Safety: ioXt Certified, DLC 5.0 NLC (PIA21A) qualified, and UL Listed for indoor commercial deployments.

Warranty: Backed by a 5-year standard warranty.

4 Programmable Scene/Control Buttons: Assign to individual fixtures, zones, areas, preset scenes, tunable white (CCT), or dynamic animations.

120–277VAC Hardwired Power: Universal line-voltage input (neutral required) eliminates battery maintenance.

Casambi Ready BLE Mesh: Wireless device-to-device control up to 30 ft (9.14m) with no control wiring to luminaires.

Standard Decora 1-Gang / Multi-Gang Fit: Mounts into standard wall boxes and Decora wall plates.

iOS & Android App Commissioning: Customize button behavior, fade times, time delays, and scene animations in the Casambi app.

ioXt, DLC 5.0 & UL Listed: Certified for commercial cybersecurity, energy compliance, and electrical safety.

Product Type

Casambi Ready 4-Button Wireless Mesh Scene & Wall Controller

Input Voltage

120–277VAC, 50/60Hz

Power Consumption

Max. 1.5W

Wiring / Terminals

Line (Black Terminal), Neutral Required (Silver Terminal), Ground Optional (Green Terminal)

Controls & Configuration

• Button #1: Short Press = AUTO/ON (Resume automatic profile control); Long Press = DIM Up

• Button #2: Short Press = OFF; Long Press = DIM Down

• Button #3: Short Press = Scene A; Long Press = CCT Colder (if available)

• Button #4: Short Press = Scene B; Long Press = CCT Warmer (if available)

• Custom App Assignments: Luminaire, Zone, Area, Scene, Tunable White, Dynamic/Cycle Animations, Toggle Mode

• Factory Reset: Hold Button #1 & Button #4 for 10 seconds

Wireless Standard

Bluetooth Low Energy (Casambi Mesh)

Maximum Bluetooth Range

30 ft (9.14m)

Programming & Commissioning

Casambi App (iOS and Android)

Mounting

Standard 1-Gang or Multi-Gang Wall Box (Decora-style opening)

Dimensions

4.11" H × 1.72" W × 1.16" Backbox Depth (104.3mm × 43.7mm × 23.5mm; 2.76" / 70.1mm rear body height)

Operating Temperature

32°F to 130°F (0°C to 55°C)

Relative Humidity

90–95% non-condensing at 30°C

Environmental

Indoor Use Only

Certifications & Safety

UL Listed, DLC 5.0 Listed (PIA21A), FCC Compliant

Cybersecurity

ioXt Certified

Color

White

Warranty

5-Year Limited Warranty