Casambi Enabled Network Fixture Node (Magnetic Mount, Translucent)

Simple 3-Wire Low-Voltage Integration: Directly connects to any dim-to-off 0-10V LED driver with a 12–24VDC auxiliary power output (Yellow: Aux+ 12–24VDC, Purple: DIM+, Gray/Pink: DIM- & Aux-).

Hardware-Free Magnetic Mounting: Integrated magnets allow fast, secure installation directly onto metal fixture housings or driver compartments without mounting screws or brackets.

Casambi Bluetooth Low Energy (BLE) Mesh Networking: Operates on a local, self-organizing wireless mesh network with up to 300 feet of node-to-node range and no single points of failure or required gateway.

Mobile App Commissioning & Scene Control: Easily programmed via the Casambi App (iOS and Android) with support for individual addressability, wireless grouping, custom scenes, and time-clock scheduling.

Multi-Level Dimming & High-End Trim: Supports Manual ON/OFF, Automatic ON/OFF, and Automatic Partial ON/OFF control when paired with wireless sensors, plus High-Trim/Tuning to set maximum light levels for each space.

Magnetic Factory Reset & Visual Status LEDs: Features convenient magnetic reset functionality and dual status indicators (Green for Network Status, Red for Sensor Detection).

Enterprise-Grade Cybersecurity: ioXt Certified and DLC 5.0 NLC qualified for commercial networked lighting deployments.

Warranty: Backed by a 5-year standard warranty.

Tool-Free Magnetic Design: Mounts effortlessly to metal luminaire housings without extra hardware.

3-Wire 12–24VDC Hardwire: Connects directly to dim-to-off 0-10V LED drivers with 12–24VDC auxiliary power.

300 ft BLE Mesh Range: Self-organizing Casambi Bluetooth Low Energy mesh up to 300 ft node-to-node (50 ft commissioning range).

Gateway-Free App Control: Configure scenes, time-clock schedules, grouping, and high-trim via the Casambi iOS/Android app.

Wide Industrial Temp Rating: Operates reliably from -40°F to 130°F (-40°C to 55°C).

ioXt & cULus Certified: Meets commercial cybersecurity and UL safety standards.

Product Type

Casambi Ready Magnetic BLE Network Control Node (Non-Sensor)

Connector / Wiring

3-Wire Hardwire (Yellow: Aux+ 12–24VDC; Purple: DIM+; Gray/Pink: DIM- & Aux-)

Operating Voltage

12–24VDC

Operating Current

Max 15mA

Sinking Current

Max 25mA

Control Output

Analog 0-10V (Linear)

PIR Motion / Daylight Sensor

No (Pairs wirelessly with ecosystem sensors)

Wireless Standard

Bluetooth Low Energy (Casambi Mesh)

Radio Frequency

2.4GHz ± 75MHz

Mesh Range

300 ft node-to-node / 50 ft node-to-device (Commissioning)

Programming & Reset

Casambi App (iOS and Android) / Magnetic Factory Reset

Overall Dimensions

2.84" L × 0.77" W × 0.41" H (72.1mm × 19.5mm × 10.5mm; 0.27" / 7.0mm tab height)

Weight

0.8 oz (23g)

Status Indicators

Green (Network Status), Red (Sensor Detection)

Operating Temperature

-40°F to 130°F (-40°C to 55°C)

Certifications & Safety

cULus Listed (E511069 Light-Emitting-Diode Controllers), DLC 5.0 NLC, FCC (47 CFR Part 15, Subpart C 15.247), Bluetooth QDID 195377

Cybersecurity

ioXt Certified

Color

Translucent

Warranty

5-Year Limited Warranty