EasyRF IR Commissioning Remote Control

App-Free E-Ink Display Interface: Features an easy-to-read E-ink screen and intuitive directional navigation pad with dedicated Home, Read, Send, Switch, Save, and Back buttons—eliminating the need for mobile apps or software.

Bi-Directional IR Communication: Point the remote at any compatible sensor from up to 50 feet away to read current settings (RECALL SETTINGS) or transmit updated configurations (SEND).

Profile Saving & Batch Cloning: Save customized parameter templates (LOAD PROFILE) to rapidly program multiple sensors across a project with identical settings.

Multi-Floor & Channel Zoning Configuration: Assign devices across up to 8 unique floors (FLOOR) and up to 50 channels per floor (CHANNEL), with support for grouping up to 50 devices per channel and toggling channel linkage (LINK).

Granular Dimming & Trim Programming: Configure High Trim (HIGH, 50–100% in 1% increments), Low Trim (LOW, 1–25% in 1% increments), Standby Dim Level (SDL, 1–100% in 1% increments), and Manual Dimming (0–100%).

Comprehensive Sensor & Timing Control: Program Hold Time (HOLD, 2s to 60min), Standby Time (STAND, 0s to 1hr or infinite), Sensitivity Detection Range (SDR, 10/50/100%), Occupancy/Vacancy Mode (VAC), Continuous Adjustment Daylight Harvesting (CAM, 26–100%), Daylight Threshold (DAY, 5–25%), and Ramp-Up/Ramp-Down fade rates (R-UP / R-DOWN, 0–60s in 1s increments).

Repeater & Diagnostic Functions: Toggle sensor repeater mode (REPEATER FUNCTION) to extend wireless channel range, test individual fixture ON/OFF response, or restore factory defaults (RESET SETTINGS).

Warranty: Backed by a 5-year standard warranty.

Bi-Directional IR Up to 50 ft: Read and write device settings from ground level without ladders, gateways, or mobile apps.

Built-In E-Ink Screen: Clear on-screen menu navigation with dedicated one-touch Read, Send, and Save buttons.

Rapid Profile Cloning: Copy settings from an existing sensor or load saved profiles to commission multiple fixtures in seconds.

Full Parameter & Trim Control: Adjust 1% granular dimming, high/low trim, hold/standby timers, fade rates, and daylight harvesting.

Multi-Floor Zoning Setup: Configure up to 8 floors and 50 channels per floor (up to 50 devices per channel).

Standard AAA Battery Power: Powered by 2x AAA batteries in a lightweight, ergonomic handheld enclosure.

Product Type

Handheld IR Remote Control Commissioning Tool (Requires at least one remote per project for commissioning)

Display

Integrated E-Ink On-Screen Display

Communication Protocol

Bi-Directional Infrared (IR) Transmitter & Receiver

Communication Range

Up to 50 ft (IR commissioning range may be impacted by ambient lighting environment)

Power Supply

2x AAA Batteries

Controls & Navigation

Directional Navigation Pad (<, >, ^, v, OK) + HOME, READ, SEND, SWITCH, SAVE, BACK buttons

Menu Functions

New Settings, Load Profile, Recall Settings, Repeater Function, Manual Dimming (0–100%), Reset Settings, ON/OFF

Configurable Parameters

• Floor (FLOOR): Up to 8 floors (Default: A)

• Channel (CHANNEL): Up to 50 channels/floor, up to 50 devices/channel (Default: 1)

• High Trim (HIGH): 50–100% in 1% steps (Default: 100%)

• Low Trim (LOW): 1–25% in 1% steps (Default: 10%)

• Hold Time (HOLD): 2s / 30s / 1m / 5m / 10m / 15m / 20m / 30m / 60m (Default: 10min)

• Standby Dim Level (SDL): 1–100% in 1% steps (Default: 50%)

• Standby Time (STAND): 0s / 10s / 1m / 5m / 10m / 30m / 1hr / Infinite (Default: 50%)

• Sensitivity Range (SDR): 10% / 50% / 100% (Default: 100%)

• Vacancy Mode (VAC): Occupancy (Auto ON) / Vacancy (Manual ON) (Default: Disabled)

• Continuous Adjustment (CAM): 26–100% or Disabled (Default: Disabled)

• Daylight Threshold (DAY): 5–25% in 5% steps or Disabled (Default: Disabled)

• Ramp-Up / Ramp-Down (R-UP / R-DOWN): 0–60s in 1s steps (Default: 2s)

• Channel Linkage (LINK): Enable / Disable (Default: ENABLE)

Dimensions

155.2mm L × 42.2mm W × 20.7mm D (6.11" × 1.66" × 0.81"; 14.1mm / 0.56" lower body profile)

Operating Temperature

32°F to 104°F (0°C to 40°C)

Certifications

FCC Compliant

Color

Black

Warranty

5-Year Standard Warranty

Download